DC MOTOR PUMP GROUP one
General Description
Consisting of the hefty duty DC motor and the CB1S gear pump, this pump motor group is an great hydraulic electrical power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP 2
Common Description
This motor pump includes 4.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump consists of a four.5″ DC motor in addition to a CBSR gear pump which has a typical electrical power up/gravity down circuit having a relief valve, a test valve and a solenoid release valve.
Unique Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned prior to mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~68 cst, which must also be clean and no cost of impurities. N46 hydraulic oil is recommended.
4. The energy unit needs to be mounted horizontally.
5. The relief valve strain is preset about 25% increased compared to the operating strain.
six. Flow management valve for lowing speed adjustment is obtainable unpon request.