Materials Managing Power UNIT two
General Description
This power unit features energy up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve using the decreasing pace managed by the strain compensated flow manage valve. Items of this series could be broadly utilized in the field of logistic products which include fork lift, mini lift table, and so on.
Specific Notes
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned in advance of mounting the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which must also be clean and free of impurities, N46 hydraulic oil is proposed .
four. Oil changing is needed immediately after the initial 100 operation hrs,afterwards the moment every single 3000 hours.
five. The energy unit must be mounted horizontally.

Materials Dealing with Electrical power UNIT one
Basic Description
This power unit is built for that fork lift marketplace, consisting of highly efficient gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are controlled through the lever with the manual release valve, which can be equipped with an electrical switch to activate the motor. The lowing velocity is managed by the stress compensated movement manage valve.
Exclusive Notes
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all of the hydraulic components concerned prior to set up of the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and absolutely free of impurities, N46 hydraulic oil is recommended .
4. Oil altering is required soon after the original a hundred operation hours, afterwards once every 3000 hours.
5. The power unit shown is created to be mounted horizontally.