A vacuum pump is a device that removes gas molecules from a sealed quantity in order to keep behind a partial vacuum. The initial vacuum pump was developed in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.
Vacuum Pumps, pressure pumps, cover a wide range of operating pressures. Laboratory/filtration vacuum pumps are for make use of in the lab or anywhere a low vacuum is necessary; typically present both vacuum and pressure features. Use tough vacuum pumps (or roughing pumps) for laboratory and commercial applications requiring an even of vacuum less than 10-3 Torr. Use high vacuum pressure pumps if you want vacuums greater than 10-3 Torr. Also, consider the free-air capacity needed (the bigger the free air capacity, the faster it’ll evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dried out or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum amounts, and lower sound, but can contaminate the system and require even more maintenance.
Industrial Vacuum Pumps
Our selection of industrial vacuum pumps includes oil-less and oil-flooded choices. We can customize a pump to suit your specific needs and provide you with guidance with regards to choosing the right pump for you. You may expect high-quality, long-lasting outcomes when you choose Becker vacuum pumps.
100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-less rotary vane vacuum pumps designed to operate on a continuing basis at any point from atmospheric pressure to vacuum pressure degree of 27” HgV (75 torr). These direct drive units are given a higher efficiency TEFC, C-face, flange mounted electric electric motor. Each one of these pumps is equipped with an integral vacuum relief valve, a 5μ inlet filter, and vibration isolators as standard equipment.