Worm travel gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where an easy to fit, high torque outcome is required. Ideal for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The electric motor is snap installed into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Motor overheating can be due to excessive stalling, also at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or simply see your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on small threaded end of the shaft, although it is not especially designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new requirements for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration now and a future proof answer. The Ever-Power gear engine offers total flexibility in mounting options includes shaft, base, encounter, and flange alternatives. The engine terminal box can be mounted in alternative positions rotated in 90º steps around the motor frame providing for unparalleled integration possibilities.
Ever-Power gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total option for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the usage of additional enclosures. Full rated output is offered by the output shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a good corner turn, optional dual result, or perhaps an inability for the engine to be back driven. The DC right angle gear motors are created for continuous and intermittent duty procedure. Our right angle gear reducers were created with many mounting plate choices, making them well suited for a number of DC motor based applications. You can expect 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a little package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking characteristic since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Products has a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Teeth Chairs / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Products will continue to work with you to design and manufacture a Worm Gear Engine which will optimize the performance of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Lower / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for sturdiness and a high torque output. Due to the special mechanical framework of the worm drive the engine output shaft is usually self locking and will not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Rated voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their power in applications where superior gear ratios are essential. Our worm geared motors happen to be consequently optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its unique requirements. The EP series worm gear motors can be quickly and efficiently adapted to fulfill your needs.
Worm gear products impress with their superior power density and small design. If required, we can also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP housing, you can expect an extensive type of bolt-on elements to customize the merchandise including torque arms, shaft addresses and output flanges. These could be easily field installed, but we will also be happy to assemble the average person components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product preferably suited for severe and challenging industries like food processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides different fixing possibilities and enable a simple assembling for the client.
Other drive configurationscan be designed by use of built-in components (e.g. torque arm and output flanges). The housings are made in light weight construction out of aluminium die cast. Electric motor attachment is realised generally through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Get Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load quickness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a good robust worm drive gearbox powered by an MM28 electric motor (included), most suitable for applications where an easy to match, high torque outcome is required, nylon housing and 
equipment, requires light oil or perhaps silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where a simple to match, high torque end result is required
Ideal for student based projects including robots and buggies
Reversible Excessive torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible Substantial torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC electric motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electrical, the end result axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where substantial holding torque’s engine is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option compared to the spur gear motor. How come worm gear so special? Check this wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the path of transmission (input shaft vs output shaft) is not reversible when using large reduction ratios, due to the increased friction involved between your worm and worm-wheel, when usually an individual start (1 spiral) worm can be used. This can be an advantage when it is desired to eliminate any possibility of the result driving the input.”
In other terms, it is difficult to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
For more details regarding worm motor visit our website.