Our worm gear reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, however, can withstand shock loading better than other decrease gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s swiftness reducer products – has been serving industry reliably for over 40 years. Its verified modular design has set the market standard for performance and is the most imitated item in the current worm gear speed reducer marketplace. But why accept a knock-off when you’re able to have the original – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, along with greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help determining which gearbox remedy is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and invite for a corner switch with optional dual output. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox will come in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest operation of our speed reducers. These gearboxes are created to handle varying loads with little backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic-type gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest performance and best output torque of most our quickness reducers. These gearboxes are made to handle varying loads with little 
backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the best choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes possess the shortest amount of our inline equipment reducer options therefore they work very well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, velocity reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a gear in the kind of a screw, also known as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A principal benefit of worm equipment reducers is definitely that they produce an output that is 90° from the insight and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox provides right hand threads; to change the direction of the output, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
Do your research study … you’ll locate people are completely satisfied with worm reduction gearbox.